日本語English
5 Best Octave Pedals: How They Work & Signal Chain Order

XTONES is a participant in affiliate programs including Amazon Associates and Reverb. We may earn a commission from qualifying purchases made through links on this page, at no extra cost to you.
Contents (7)
An octave pedal lets you pull off unison lines, synth textures, and organ-like tones.
Beyond rock, octave pedals see surprisingly heavy use in modern genres like jazz and fusion.
Here, we highlight standout, gig-ready octave pedals selected from the many options on the market.
What Is an Octave Pedal?

An octave pedal is:
A pedal that generates notes one octave below (or above) your original signal in real time.
*Some units even cover two octaves down.
Dropping down an octave dips into bass territory, giving you tight unison tracking and heavy low end.
Adding an octave up opens up synth- or organ-like textures and shimmer.
Octave Pedal Signal Chain Placement

Octave pedals fall under the pitch-shifting category of effects.
Standard placement on a pedalboard is right after a volume pedal and before your drive pedals.
That said, placing an octave pedal after drive is also popular, so feel free to experiment based on your preferred tone.
As a general rule, running it early in the chain ensures accurate tracking before gain or time-based effects alter the signal.
5 Octave Pedals Worth a Look
Electro-Harmonix Nano POG

Product Details
The Nano POG is the smallest unit in Electro-Harmonix's Polyphonic Octave Generator series, engineered to save maximum space on your pedalboard.
Like its larger POG siblings, tracking and tone quality are top-tier. Controls for Dry, Sub Octave, and Octave Up alongside quiet switching make it a refined performance pedal.
• Compact design to save pedalboard real estate
• Flawless tracking on chords, sweeps, or single notes
• Delivers thick 12-string guitar or bass-like low end
• Rich organ-style tones
• Independent level controls for original pitch, sub-octave, and upper octave
• Dedicated dry and effect output jacks
• Power adapter (JP9.6DC-200) included
electro-harmonix / POG2

Product Details
The POG, long popular for its organ-like tones, takes another step forward with the POG2.
Like the original POG, it tracks both single notes and full chords smoothly and accurately. You can mix up to 5 polyphonic octave voices (+/-2 octaves) to craft massive textures reminiscent of synth bass, organ, or an 18-string guitar. Enhanced algorithms deliver improved harmonic tracking and tone response.
You get full control over the Attack, Tone, and Detune of each voice. Fade octaves in with the attack delay control, shape deep low-end frequencies using the low-pass filter with selectable Q modes, and build unique soundscapes with the detune slider.
Save up to 8 user presets directly to the pedal for instant setting changes during live performances.
A rich, musical multi-octave unit tailored for guitarists seeking unconventional sound options.
True bypass
Dimensions: 144 (W) x 119 (D) x 60 (H) mm / Weight: 650 g
Power: 9V DC center negative adapter (included)
BOSS / OC-5

Product Details
The OC-5 merges classic BOSS octave tones with updated tracking technology to create a benchmark octave pedal.
VINTAGE mode faithfully recreates the iconic monophonic sound of the classic 1982 OC-2, while POLY mode adds tracking stability across an even wider register.
With the addition of a +1 octave setting, it covers an expanded three-octave range.
From fat monophonic octave lines to register-shifted chord playing, the OC-5 delivers wide pitch coverage, smooth playability, and refined octave tones.
<Key Features>
• Updated features establish a new standard for octave pedals
• Newly developed tracking technology delivers precise, natural response with zero latency
• VINTAGE mode faithfully recreates the iconic monophonic sound of the classic OC-2
• POLY mode for chord playing, with a RANGE knob to define the effect frequency band
• Setting the RANGE knob to LOWEST in POLY mode applies the -1 octave effect to only the lowest note in a chord
• +1OCT knob for adding a +1 octave signal
• GUITAR/BASS switch optimizes the tracking engine for your instrument
• DIRECT OUT jack for splitting direct sound to a separate output
• 5-year BOSS warranty
■ High-Performance Octave Pedal
Powered by BOSS's latest real-time processing technology, the OC-5 is an expressive octave pedal built for tone and playability.
It delivers tight, latency-free tracking and accurate performance.
It also expands polyphonic tracking over a wider range than previous models.
The OC-5 is a versatile pedal designed to cover every octave effect need.
■ Classic Tone with VINTAGE Mode
Debuting in 1982, the OC-2 stood out as a pioneering modern octave pedal.
Its warm, full-bodied tone can be heard on countless classic recordings and remains a favorite among guitarists and bassists worldwide.
VINTAGE mode on the OC-5 pairs modern tracking with the OC-2's signature monophonic sound, offering a smoother, more responsive feel under your fingers.
Two dedicated LEVEL knobs let you adjust the -1 and -2 octave levels independently.
The DIRECT LEVEL knob controls the blend between direct and effect signals, giving you full command over your sound.
■ Enhanced POLY Mode
The OC-5 also features an updated POLY mode, building on the polyphonic octave functionality first introduced in the OC-3 Super Octave to provide full chord support.
The RANGE knob allows you to restrict the effect to specific frequency zones, applying -1 octave sound exactly where you want it across melodies and chords.
Setting the RANGE knob to LOWEST isolates the octave effect strictly to the lowest note of any chord.
■ New +1 Octave Sound
The OC-5 allows you to add a +1 octave signal in both VINTAGE and POLY modes.
This opens up a wide range of uses—from simulating chimey 12-string guitar sounds to thickening chords alongside a -1 octave effect, or blending a +1 octave for fat unison soloing that cuts through.
■ GUITAR/BASS Switch and DIRECT OUT Jack
Flipping the body-mounted GUITAR/BASS switch optimizes the tracking engine specifically for guitar or bass for optimal tracking.
The DIRECT OUT jack makes it easy to route dry and wet signals separately to a mixer, audio interface, or a dual-amp setup.
■ Nominal Input Level: -20 dBu
■ Input Impedance: 1 MΩ
■ Nominal Output Level: -20 dBu
■ Output Impedance: 1 kΩ
■ Recommended Load Impedance: 10 kΩ or greater
■ Bypass: Buffered bypass
■ Controls: Pedal switch, GUITAR/BASS switch, VINTAGE/POLY switch, DIRECT LEVEL knob, +1OCT knob, -1OCT knob, -2OCT/RANGE knob
■ Indicator: CHECK indicator (serves also as battery check indicator)
■ Connectors: INPUT jack (1/4-inch phone type), OUTPUT jack (1/4-inch phone type), DIRECT OUT jack (1/4-inch phone type), DC IN jack
■ Power Supply: Alkaline battery (9V), AC adaptor (sold separately)
■ Current Draw: 55 mA
■ Expected battery life under continuous use (varies depending on conditions) Alkaline: approx. 7 hours
■ Dimensions: 73 (W) x 129 (D) x 59 (H) mm
■ Weight (including battery): 440 g
■ Accessories: Owner's Manual, Leaflet ("USING THE UNIT SAFELY," "IMPORTANT NOTES," and "Information"), Alkaline battery (9V, connected to unit), Warranty
■ Options (sold separately) AC Adaptor: PSA-100
* 0 dBu = 0.775 Vrms
tc electronic / Sub ‘N’ Up Octaver / Mini

Product Details
The Sub ‘N’ Up Octaver is a next-generation octave processing pedal built around TC's advanced pitch detection algorithms. Featuring independent blend controls for dry mix level, octave up, sub 1 octave, and sub 2 octaves, it delivers flawless tracking whether playing complex chords or single-note solo runs. With the free TonePrint Editor, you can fully customize the pedal's controls and even add modulation to your octave tones.
• Next-generation octave processing engine delivering flawless polyphonic tracking
• Recreates classic monophonic octave effects
• Add modulation to octave tones via TonePrint technology
● Toggle Switch
Switch between three modes: "POLY" for full polyphonic chord tracking, "CLASSIC" for vintage single-note octave playing, and "TONEPRINT" to access custom octave settings via the free TonePrint Editor.
● Polyphonic Octave via Advanced Pitch-Shifting Technology
The Sub ‘N’ Up features state-of-the-art polyphonic pitch detection technology. It tracks blazingly fast and smooth, delivering seamless octave effects even when playing full chords. Dial in shimmering 12-string-style textures or thick classic sub-octave riffs with ease.
● Old-School Monophonic Octave
The Sub ‘N’ Up also handles classic monophonic single-note octaves with ease, perfect for laying down pseudo-basslines on electric guitar. Crank up the 1 Octave Down and 2 Octave Down knobs to add serious low-end punch.
● TonePrint Enabled / Modulated Octaves
With TonePrint compatibility, you can beam custom presets created by world-renowned artists and engineers straight to your pedal. Using the free TonePrint Editor software gives you complete control to customize your setup and unlocks access to a built-in modulation engine to create unique, unheard-of pitch textures.
● DRY Knob
Adjusts the dry signal level. Keeping it higher preserves your core guitar tone without letting it get swallowed by the octave effect, while lowering it enhances the octave sound for organ-like tones.
● SUB Knob
Adjusts the mix level for the sound one octave down.
● UP Knob
Adjusts the mix level for the sound one octave up. Turn it up and pair with reverb to create shimmering, ambient textures.
● SUB 2 Knob
Adjusts the mix level for the sound two octaves down. Setting it higher delivers stage-shaking low-end depth.
● True Bypass
The Sub ‘N’ Up Octaver features true bypass switching, ensuring zero signal degradation when the pedal is off to keep your tone completely clear and transparent.
● Bypass Mode: True Bypass (switchable to Buffered Bypass)
● Dimensions (W x D x H): 93 x 48 x 48 mm (3.7 x 1.9 x 1.9″)
● Input Connector: Standard ¼” jack – mono / TS
● Output Connector: Standard ¼” jack – mono / TS
● Power Input: Standard 9 V DC, center negative, >100 mA (power supply sold separately)
● Battery Option: Standard 9 V (sold separately)
● Input Impedance: 1 MΩ
● Output Impedance: 100 Ω
● USB Port: Mini USB connector (for editing/uploading custom TonePrints and firmware updates)
Mini version




